The POWERTEX G10 Sling Hook SHS-B with Ball-Bearing Swivel is a Grade 100 lifting hook designed for chain-sling assemblies that require quick attachment and hook rotation. The solid latch helps retain the load within the hook, while the ball-bearing swivel eye allows rotation both loaded and unloaded, helping maintain the required hook orientation during lifting.
Available for 6 mm up to 16 mm chain and from WLL 1.4t up to WLL 10t.
Best used for:
- Chain sling assemblies requiring a sling hook that can rotate under load.
Powertex G10 Range benefits:
- Ball-bearing swivel eye allows rotation both loaded and unloaded.
- Solid latch helps retain the lifting point within the hook.
- Open hook profile enables quick attachment to suitable lifting points.
- Grade 100 design offers 25% higher WLL than traditional Grade 80 components.
- Conforms to EN 1677 Parts 1, 2, 3 and 4 with a 25% higher WLL.
- Every forged component is crack detection tested. Production samples are proof-load tested, and the design is factory type tested.
- Fatigue tested to 20,000 cycles at 1.5 × WLL with batch traceability and a POWERTEX 2.2 certificate.
- The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling must be rated to Grade 8 in accordance with EN 818-4.
- Marking: According to standard, POWERTEX + Model (SHS-6-10B) + traceability code.
- Temperature range: -40°C up to +200°C without reduction in WLL
- Finish: Powder painted in red
- Standard: EN 1677-2 (+25% WLL), AS 3776
- Safety factor: 4:1
- Grade: 10
