General: Wire rope clamp is approved for lifting if assembly is carried out according to instruction manual. The wire rope clamp is to be used with 6 and 8 strand steel wire ropes with steel or fibre core with tensile strength up to 1960 N/mm2. Correctly mounted the assembling will stand 80% of the rope's minimum breaking load (MBL).
Design: 2101-2102 casted, 2103-2108 dropforged.

Note: Wire ropes for general applications with fiber or steel core with max strenght of 1960 N/mm2. Not for use with compacted or hammered wire ropes. It is not recommended to use plastic covered ropes for lifting purposes with wire rope clamps.
Follow the fitting instructions in the user manual before use.
 

  • Finish: 2101-2102 zinc-plating, 2103-2108 hot dip galvanizing.
  • Warning: In case the clamps half-parts tangent each other when tightening the screws, a smaller EUREKA wire clamp shall be used.
Eureka wirelåse new
Select a row from the table below, then click the add to quote button
Art No Code Length (mm) screw Ø - (mm) Outer Ø
mm
Diameter
mm
No of clamps when lifting Screw Number pcs. Moment Nm Weight
kg/100pcs
CAD
10.175032005 2101 27 5 22 4-5 2 2 6 6.5
10.175032006 2102 42 6 28 6 2 2 15 14
10.175032008 2103 50 6 33 8 2 2 18 24
10.175032010 2104 63 8 42 9-10 2 2 30 52
10.175032011 2105 62 8 43 11 2 2 30 52
10.175032013 2106 82 10 48 12-13 2 2 70 80
10.175032014 2107 106 10 50 14 2 2 70 115
10.175032016 2108 100 12 62 15-16 2 2 115 170

Download CAD

Description

Get CAD
Download